Eye & Eye

First Sling

hg2262

Hot Dip galvanized steel.
End fittings are Quenched and Tempered, bodies heat treated by normalizing.
Turnbuckle eyes are forged elongated, by design, to maximize easy attachment in system and minimize stress in the eye. For turnbuckle sizes 1/4" through 2-1/2", a shackle one size smaller can be reeved through eye.
Modified UNJ thread on end fittings for improved fatigue properties. Body has UNC threads.
Crosby products meet or exceed all the requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, Crosby products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
TURNBUCKLES RECOMMENDED FOR STRAIGHT OR IN-LINE PULL ONLY.
Lock Nuts available for all sizes
Comprehensive end fitting data available
Fatigue Rated.

Meets the performance requirements of Federal
Specifications FF-T-791b, Type 1 Form 1 - CLASS 4, and ASTM F-1145, except for those provisions required of the contractor.

HG-226
Eye & Eye

Thread Diameter & Take Up (in.)	Stock No. Galv.	Working Load Limit * (lbs.)	Weight Each (lbs.)	Dimensions (in.)
Thread Diameter & Take Up (in.)	Stock No. Galv.	Working Load Limit * (lbs.)	Weight Each (lbs.)	A	J Open	K Closed	M Open	N Closed	R	S	X Closed	BB
1/4 x 4	1031252	500	.26	.25	11.80	7.80	12.25	8.25	.78	.34	1.75	4.00
5/16 x 4-1/2	1031270	800	.45	.31	13.56	9.06	14.12	9.62	.94	.44	2.09	4.50
3/8 x 6	1031298	1200	.76	.38	17.47	11.47	18.16	12.16	1.12	.53	2.52	6.00
1/2 x 6	1031314	2200	1.54	.50	20.08	13.08	20.96	13.96	1.44	.72	3.23	6.00
1/2 x 12	1031350	2200	2.14	.50	32.08	19.08	32.96	19.96	1.44	.72	3.23	12.00
5/8 x 6	1031378	3500	2.40	.63	21.93	14.68	22.93	15.68	1.75	.88	3.90	6.00
5/8 x 12	1031412	3500	3.42	.63	33.93	20.68	34.93	21.68	1.75	.88	3.90	12.00
3/4 x 6	1031430	5200	3.79	.75	23.88	16.38	25.12	17.62	2.09	1.00	4.69	6.00
3/4 x 12	1031476	5200	5.48	.75	35.88	22.38	37.12	23.62	2.09	1.00	4.69	12.00
3/4 x 18	1031494	5200	7.19	.75	47.88	28.38	49.12	29.62	2.09	1.00	4.69	18.00
7/8 x 12	1031519	7200	7.22	.88	37.07	23.32	38.57	24.82	2.38	1.25	5.10	12.00
7/8 x 18	1031537	7200	9.95	.88	49.07	29.32	50.57	30.82	2.38	1.25	5.10	18.00
1 x 6	1031555	10000	9.04	1.00	27.97	19.97	29.72	21.72	3.00	1.44	6.36	6.00
1 x 12	1031573	10000	11.50	1.00	39.97	25.97	41.97	27.72	3.00	1.44	6.36	12.00
1 x 18	1031591	10000	14.00	1.00	51.97	31.97	53.72	33.72	3.00	1.44	6.36	18.00
1 x 24	1031617	10000	17.25	1.00	63.97	37.97	65.72	39.72	3.00	1.44	6.36	24.00
1-1/4 x 12	1031635	15200	19.00	1.25	42.81	28.31	45.06	30.56	3.56	1.81	7.72	12.00
1-1/4 x 18	1031653	15200	23.00	1.25	54.81	34.31	57.06	36.56	3.56	1.81	7.72	18.00
1-1/4 x 24	1031671	15200	27.00	1.25	66.81	40.31	69.06	42.56	3.56	1.81	7.72	24.00
1-1/2 x 12	1031699	21400	27.50	1.50	45.50	30.50	48.00	33.00	4.06	2.12	8.62	12.00
1-1/2 x 18	1031715	21400	31.00	1.50	57.50	36.50	60.00	39.00	4.06	2.12	8.62	18.00
1-1/2 x 24	1031733	21400	37.50	1.50	69.50	42.50	72.00	45.00	4.06	2.12	8.62	24.00
1-3/4 x 18	1031779	28000	52.50	1.75	57.38	39.38	60.38	42.38	4.62	2.38	10.00	18.00
1-3/4 x 24	1031797	28000	58.00	1.75	69.38	45.38	72.38	48.38	4.62	2.38	10.00	24.00
2 x 24	1031813	37000	85.25	2.00	75.69	51.69	79.19	55.19	5.75	2.69	13.09	24.00
2-1/2 x 24	1031831	60000	144.25	2.50	78.62	54.62	82.62	58.62	6.50	3.12	13.78	24.00
2-3/4 x 24	1031859	75000	194.00	2.75	81.00	57.00	85.50	61.50	7.00	3.25	15.22	24.00

* Proof Load is 2.5 times the Working Load Limit. Ultimate Load is 5 times the Working Load Limit.
&nbsp Mechanical Galvanized.