 |
- Forged - Quenched and Tempered.
- Load rating codes stamped on each hook. 322 Swivel Hooks use the
same load rating code as 319 Shank Hooks
- Proper design, careful forging, and precision controlled quench and
tempering gives maximum strength without excessive weight and bulk.
- Hoist hooks incorporate markings forged into the product which
address two (2) QUIC-CHECK features:
- Deformation Indicators -- Two strategically placed marks, one just
below the shank or eye and the other on the hook tip, which allows for a QUIC-CHECK measurement to determine if the throat opening has changed, thus indicating
abuse or overload. To check, use a measuring device (i.e. tape measure) to
measure the distance between the marks. The marks should align to either an inch or half-inch
increment on the measuring device. If the measurement does not meet this criteria, the hook
should be inspected further for possible damage.
- Angle Indicators - Indicates the maximum included angle which is
allowed between two (2) sling legs in the hook. These indicators also provide
the opportunity to approximate other included angles between two slings legs.
|
 |
This hook is a positioning device and is not intended to rotate
under load. For swivel hooks designed to rotate
under load, see page 93, 95, 103, 106, 111-115. Use in corrosive environment requires
shank and nut inspection in accordance with
A.S.M.E. B30.10-1.2.1(b)(2)(c) 2000. |
|
- U.S. Patents 5,381,650 & 5,193,480 & 5,103,755 and foreign
equivalents.
|
Working Load
Limit
(t)*
|
S-322CN
Stock No. |
S-322AN
Stock No.
|
Weight
Each
(lbs.) |
Dimensions
(in.) |
|
Carbon |
Alloy |
A |
B |
C |
D |
F |
G |
H |
J |
K |
L |
M |
O |
R |
S |
AA |
3/4 |
1 |
1048600 |
1048804 |
.75 |
2.00 |
.82 |
1.25 |
2.86 |
1.25 |
.73 |
.81 |
.93 |
.63 |
5.66 |
.63 |
.93 |
4.55 |
.38 |
1.50 |
1096325 |
1 |
1-1/2 |
1048609 |
1048813 |
1.25 |
2.50 |
1.31 |
1.50 |
3.15 |
1.38 |
.84 |
.94 |
.97 |
.71 |
6.71 |
.71 |
.97 |
5.37 |
.50 |
2.00 |
1096374 |
1-1/2 |
2 |
1048618 |
1048822 |
2.25 |
3.00 |
1.50 |
1.75 |
3.59 |
1.50 |
1.00 |
1.16 |
1.06 |
.88 |
7.75 |
.88 |
1.06 |
6.12 |
.63 |
2.00 |
1096421 |
2 |
3 |
1048627 |
1048831 |
2.30 |
3.00 |
1.50 |
1.75 |
4.00 |
1.62 |
1.13 |
1.31 |
1.19 |
.94 |
8.25 |
.94 |
1.16 |
6.50 |
.63 |
2.00 |
1096468 |
3 |
5 |
1048636 |
1048837 |
4.96 |
3.50 |
1.64 |
2.00 |
4.84 |
2.00 |
1.44 |
1.63 |
1.50 |
1.31 |
9.69 |
1.13 |
1.41 |
7.50 |
.75 |
2.50 |
1096515 |
5 |
7 |
1048645 |
1048854 |
10.29 |
4.56 |
2.29 |
2.50 |
6.28 |
2.50 |
1.81 |
2.06 |
1.78 |
1.66 |
12.47 |
1.44 |
1.69 |
9.63 |
1.00 |
3.00 |
1096562 |
7-1/2 |
11 |
1048654 |
1048865 |
16.18 |
5.00 |
2.53 |
2.75 |
7.54 |
3.00 |
2.25 |
2.63 |
2.41 |
1.88 |
14.75 |
1.63 |
2.22 |
11.37 |
1.13 |
4.00 |
1096609 |
10 |
15 |
1048663 |
1048877 |
23.25 |
5.62 |
2.48 |
3.12 |
8.34 |
3.25 |
2.59 |
2.94 |
2.62 |
2.19 |
16.40 |
1.94 |
2.41 |
12.25 |
1.25 |
4.00 |
1096657 |
15 |
22 |
1048672 |
1048886 |
47.00 |
7.10 |
3.76 |
4.10 |
10.34 |
4.25 |
3.00 |
3.50 |
3.41 |
2.69 |
21.34 |
2.38 |
3.19 |
16.71 |
1.50 |
5.00 |
1096704 |
-- |
30 |
-- |
1025688 |
70.50 |
7.10 |
3.76 |
4.10 |
13.62 |
5.00 |
3.61 |
4.63 |
4.00 |
3.00 |
23.25 |
3.00 |
3.25 |
18.01 |
1.50 |
6.50 |
1093716 |
* NOTE: Carbon swivel hooks .75tC-15tC: proof load is 2 times working
load limit. Designed with a 5 to 1 design factor.
Alloy swivel hooks 1.5tA-22tA : proof load is 2.5 times the
working load limit. Designed with a 4.5 to 1 design factor.
Alloy swivel hooks 30tA: proof load is 2 times working
load limit. Designed with a 4 to 1 design factor.
Dimensions for hooks 3/4 ton carbon thru 22 ton alloy
are for S-4320 latch kits. Dimensions for hooks 30 ton alloy are for PL latch
kit. |