| Dimensions (in.) | ||||||||
| Working Load Limit (lbs.) | Jaw Capacity (in.) | A | B | C | D | E | F | Weight (lbs.) |
| 1100 | 0-5/8 | 3-3/4 | 7-1/2 | 2 | 1-1/8 | 2 | 1-1/2 | 3 |
| 3300 | 0-3/4 | 5 | 9-1/2 | 2 | 1-7/8 | 2-3/4 | 3-3/8 | 7 |
| 4400 | 0-1-1/4 | 7-5/8 | 13-3/4 | 3-1/8 | 2-7/8 | 3-3/4 | 4-3/8 | 18 |
| 6600 | 0-1-1/4 | 7-5/8 | 14 | 3-1/8 | 2-7/8 | 3-3/4 | 4-1/2 | 22 |
| 8800 | 0-1-1/4 | 7-1/2 | 14-1/4 | 3-1/8 | 2-1/4 | 3-3/4 | 3-7/8 | 26-1/2 |
| 8800 | 1-1/4-2-3/8 | 9 | 14-1/4 | 3-1/8 | 2-1/4 | 3-3/4 | 3-7/8 | 40 |
| 13,200 | 0-2 | 11-1/2 | 17-1/2 | 3-1/2 | 3-3/4 | 5-5/8 | 4-3/4 | 46-1/2 |
| 13,200 | 2-4 | 14-1/4 | 17-1/4 | 3-1/2 | 3-3/4 | 5-5/8 | 4-3/4 | 62 |
| 17,600 | 0-2 | 11-1/2 | 17-3/4 | 3-1/2 | 3-3/4 | 5-5/8 | 4-3/8 | 57-1/2 |
| 17,600 | 2-4 | 14-1/4 | 19 | 3-1/2 | 4-1/2 | 5-5/8 | 4-3/4 | 70-1/2 |
| 22,000 | 0-2 | 11-1/2 | 19-3/4 | 4-3/8 | 3-3/4 | 5-5/8 | 5-1/8 | 66 |
| 22,000 | 2-4 | 14-1/4 | 19-3/4 | 4-3/8 | 4-1/2 | 5-5/8 | 5-1/8 | 81-1/2 |
| 26,400 | 0-2 | 14-1/8 | 21-5/8 | 5-1/8 | 5 | 6-3/8 | 5-3/4 | 119 |
| 26,400 | 2-4 | 18-1/8 | 24-1/4 | 5-1/8 | 6-7/8 | 6-3/8 | 5-3/4 | 139 |
| 33,000 | 0-2 | 14-1/8 | 21-5/8 | 5-1/8 | 5 | 3-3/8 | 7-5/8 | 165-1/2 |
| 33,000 | 2-4 | 18-1/8 | 14-1/4 | 5-1/8 | 6-7/8 | 6-3/8 | 7-5/8 | 194 |
| 44,000 | 0-2-1/2 | 18-1/8 | 26-1/2 | 5-1/8 | 6-1/2 | 8-1/4 | 9-1/4 | 271 |
| 44,000 | 2-1/2-5-1/8 | 22 | 26-1/2 | 5-1/8 | 7-5/8 | 8-1/4 | 9-1/4 | 300 |
| 66,000 | 0-2-1/2 | 18-1/8 | 26-1/4 | 6-1/4 | 6-1/2 | 8-1/4 | 11-1/2 | 430 |
| 66,000 | 2-1/2-5-1/8 | 22 | 28-7/8 | 6-1/4 | 7-5/8 | 8-1/4 | 11-1/2 | 650-1/2 |
Lift and turn over plates in one smooth operation. Plates can be turned over or lifted from the horizontal to the true vertical position.
Available with either standard hookring for use with existing sling hook or with integral short chain sling for direct fitting on to the crane hook.
Hardened steel jaws for positive grip and locking mechanism.
695233, 695234 and 695235 clamps include a jaw and corresponding pad wear indicator to provide visible warning when replacement is required.
The CZ92 ramge of clamps can be specially reinforced to withstand frequent dragging. They can also be supplied with a heavy-duty “sharp leg” where a wedge action is required to separate plates. Price on application.
Lift one plate only at a time.
Suitable for all structural steel up to 300 Brinell surface hardness.
