You are here: Home / Products / Black Diamond Wire Rope Fittings / Eye Bolts / Shoulder Nut Eye Bolts

Shoulder Nut Eye Bolts

G277

  • Forged
    Steel – Quenched and Tempered.      
  • Fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles  
  • All Bolts Hot Dip galvanized after threading (UNC).
  • Furnished with
    standard Hot Dip galvanized hex nuts.
  • Recommended for in
    line pull.
  • Crosby products meet or exceed all the requirements of ASME B30.26
    including identification, ductility, design factor, proof load and temperature
    requirements.  Importantly, Crosby products meet other critical
    performance requirements inluding fatigue life, impact properties and material
    traceability, not addressed by ASME B30.26.

G-291

Regular Nut Eye Bolts
Shank

Dia. & Length

(in.)

  G-291

Stock No.

Galv.

 Working

Load Limit *

(lbs.)

 Weight
Per

100

(lbs.)

 Dimensions

(in.)
A B C D E F G H
1/4 x
2		 1043230 650 8.20 .25 .50 1.00 .25 1.50 2.00 3.06 .56
1/4 x
4		 1043258 650 11.70 .25 .50 1.00 .25 2.50 4.00 5.06 .56
5/16 x
2-1/4		 1043276 1200 13.30 .31 .62 1.25 .31 1.50 2.25 3.56 .69
5/16 x
4-1/4		 1043294 1200 25.00 .31 .62 1.25 .31 2.50 4.25 5.56 .69
3/8 x
2-1/2		 1043310 1550 23.30 .38 .75 1.50 .38 1.50 2.50 4.12 .88
3/8 x
4-1/2		 1043338 1550 29.50 .38 .75 1.50 .38 2.50 4.50 6.12 .88
3/8 x
6		 1043356 155 35.20 .38 .75 1.50 .38 2.50 6.00 7.62 .88
1/2 x
3-1/4		 1043374 2600 50.30 .50 1.00 2.00 .50 1.50 3.25 5.38 1.12
1/2 x
6		 1043392 2600 66.10 .50 1.00 2.00 .50 3.00 6.00 8.12 1.12
1/2 x
8		 1043418 2600 82.00 .50 1.00 2.00 .50 3.00 8.00  10.12 1.12
1/2 x
10		 1043436 2600 88.00 .50 1.00 2.00 .50 3.00 10.00 12.12 1.12
1/2 x
12		 1043454 2600 114.20 .50 1.00 2.00 .50 3.00 12.00 14.12 1.12
5/8 x
4		 1043472 5200 103.10 .62 1.25 2.50 .62 2.00 4.00 6.69 1.44
5/8 x
6		 1043490 5200 118.20 .62 1.25 2.50 .62 3.00 6.00 8.69 1.44
5/8 x
8		 1043515 5200 135.10 .62 1.25 2.50 .62 3.00 8.00 10.69 1.44
5/8 x
10		 1043533 5200 153.60 .62 1.25 2.50 .62 3.00 10.00 12.69 1.44
5/8 x
12		 1043551 5200 167.10 .62 1.25 2.50 .62 4.00 12.00 14.69 1.44
3/4 x
4-1/2		 1043579 7200 168.60 .75 1.50 3.00 .75 2.00 4.50 7.69 1.69
3/4 x
6		 1043597 7200 184.50 .75 1.50 3.00 .75 3.00 6.00 9.19 1.69
3/4 x
8		 1043613 7200 207.90 .75 1.50 3.00 .75 3.00 8.00 11.19 1.69
3/4 x
10		 1043631 7200 235.00 .75 1.50 3.00 .75 3.00 10.00 13.19 1.69
3/4 x
12		 1043659 7200 257.50 .75 1.50 3.00 .75 4.00 12.00 15.19 1.69
3/4 x
15		 1043677 7200 298.00 .75 1.50 3.00 .75 5.00 15.00 18.19 1.69
7/8 x
5		 1043695 10600 270.00 .88 1.75 3.50 .88 2.50 5.00 8.75 2.00
7/8 x
8		 1043711 10600 308.00 .88 1.75 3.50 .88 4.00 8.00 11.75 2.00
7/8 x
12		 1043739 10600 400.00 .88 1.75 3.50 .88 4.00 12.00 15.75 2.00
1 x 6 1043757 13300 421.00 1.00 2.00 4.00 1.00 3.00 6.00 10.31 2.31
1 x 9 1043775 13300 468.50 1.00 2.00 4.00 1.00 4.00 9.00 13.31 2.31
1 x 12 1043793 13300 540.00 1.00 2.00 4.00 1.00 4.00 12.00 16.31 2.31
1 x 18 1043819 13300 650.00 1.00 2.00 4.00 1.00 7.00 18.00 22.31 2.31
1-1/4
x 8		 1043837 21000 750.00 1.25 2.50 5.00 1.25 4.00 8.00 13.38 2.88
1-1/4
x 12		 1043855 21000 900.00 1.25 2.50 5.00 1.25 4.00 12.00 17.38 2.88
1-1/4
x 20		 1043873 21000 1210.00 1.25 2.50 5.00 1.25 6.00 20.00 25.38 2.88

*Ultimate Load is 5 times the
Working Load Limit.  Working Load Limit shown is for in-line pull.

Maximum Proof Load is 2 times the Working Load Limit.
Print Friendly